DeWalt DW876 - Technical Data; Declaration of Conformity; EC Declaration of Conformity

11
ENGLISH
en - 1
TWO SPEED BANDSAW DW876
Congratulations!
You have chosen a DEWALT product. Years of experience, thorough
product development and innovation make DEWALT one of the most
reliable partners for professional users.
Table of contents
Technical data en - 1
Declaration of conformity en - 1
Safety instructions en - 2
Package contents en - 3
Description en - 3
Assembly and adjustment en - 3
Instructions for use en - 4
Maintenance en - 5
Guarantee en - 5
Technical data
DW876
Motor power (input) W 1000
Motor power (output) W 750
Voltage V 230
No load speed
1st gear m/min 380
2nd gear m/min 880
Max. cutting height mm 200
Max. cutting width mm 315
Table size mm 500 x 500
Table inclination right 0 - 45°
Overall dimensions (without legstand) mm 1050 x 700 x 500
(with legstand) mm 1600 x 700 x 500
Dust extraction adaptor, ø mm 100
Blade width mm 4 - 20
Weight kg 44.5
Standard equipment:
Legstand, general purpose blade, rip fence, mitre fence.
Fuses:
Europe 230 V tools 10 Amperes, mains
UK & Ireland 13 Amperes, in plug
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or damage to the
tool in case of non-observance of the instructions in this
manual.
Denotes risk of electric shock.
Sharp edges.
Declaration of conformity
DW876
D
EWALT declares that these Power Tools have been designed in
compliance with: 89/392/EEC, 89/336/EEC, 73/23/EEC, EN 61029,
EN 55104, EN 55014, EN 61000-3-2 & EN 61000-3-3.
Level of sound pressure according to 86/188/EEC & 89/392/EEC,
measured according to DIN 45635:
DW876
L
pA
(sound pressure) dB(A)* 84.0
L
WA
(acoustic power) dB(A) 92.0
* at the operator’s ear
Take appropriate measures for the protection of hearing if the
sound pressure of 85 dB(A) is exceeded.
Weighted root mean square acceleration value according to DIN 45675:
DW876
< 2.5 m/s
2
TÜV Rheinland
Sicherheit und Umweltschutz GmbH
Am Grauen Stein
D-51105 Köln
Germany
Cert. No.
BM961122201
Director Engineering & Product Development
Horst Großmann
DEWALT, Idstein, Germany