English
13
CAUTION: Do not cut through bolts with the metal saw. Damage
to the saw or personal injury could result.
Maximizing Blade Life
To extend blade life, follow these practices:
1. Do not force the blade through the metal. The saw must cut at
its own pace and at a constant rate.
2. Keep base of the saw firmly against metal you are cutting.
3. If the metal you are cutting is vibrating or shaking, clamp the
material as close to the cut as possible and slow down the
cutting rate.
Changing Blades
WARNING: To reduce the risk of serious personal injury,
turn tool off and disconnect tool from power source before
making any adjustments or removing/installing attachments
or accessories.
M
N
F
FIG. 8A
D
TO INSTALL THE BLADE
1. Place inner clamp washer (M) on saw spindle with the large flat
surface facing out toward the blade (Fig. 8A, 8B).
F
N
M
SPINDLE
BLADE
FIG. 8B
M
F
N
To Next Page
Loading...
