ENGLISH
25
WET TILE CUTTER
DWC410
Congratulations!
You have chosen a DEWALT tool. Years of
experience, thorough product development and
innovation make DEWALT one of the most reliable
partners for professional power tool users.
Technical Data
DWC410
Voltage V 230
UK & Ireland V 115
Type 1
Power input W 1,300
No load speed min
-1
13,000
Wheel diameter mm 110
Cutting depth at 90˚ mm 34
Maximum permissible
water pressure bar 6
Weight kg 3.0
L
PA
(sound pressure) dB(A)
102.4
K
PA
(sound pressure uncertainty) dB(A)
3.0
L
WA
(sound power) dB(A)
113.4
K
WA
(sound power uncertainty) dB(A)
3.0
Vibration total values (triax vector sum) determined according to
EN 60745:
Vibration emission value a
h
a
h
=
m/s²
4.1
Uncertainty K = m/s² 1.5
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off
or when it is running but not actually
doing the job. This may significantly
reduce the exposure level over the total
working period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
Fuses
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
NOTE: This device is intended for the connection to
a power supply system with maximum permissible
system impedance Zmax of 0.367 at the interface
point (power service box) of user’s supply.
The user has to ensure that this device is connected
only to a power system which fulfils the requirement
above. If necessary, the user can ask the public
power supply company for the system impedance at
the interface point.
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
To Next Page
Loading...
Need help?
General
