ENGLISH
29
• Keep your body positioned to either side
of the blade, but not in line with the saw
blade.
• NOTICE: Blades coast after turn off. Serious
personal injury may result.
Residual Risks
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing .
– Risk of personal injury due flying particles.
– Risk of burns due to accessories becoming hot
during operation.
– Risk of personal injury due to prolonged use.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Never use toothed or segmented
diamond blades
DATE CODE POSITION (FIG. 1)
The Date Code (j), which also includes the year of
manufacture, is printed into the housing.
Example:
2010 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Water kit
1 Blade Spanner
1 Blade Wrench
1 Cutting disc
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. PRCD on cord set
b. On/Off Switch
c. Lock-On button
d. Diamond blade
e. External flange
f. Clamping screw
g. Water tubing
h. Tool inlet
i. Water inlet
j. Date code
k. Screw
l. Water nozzle
m. Depth adjustment knob
n. Shoe
o. Water valve lever
p. Cutting guide
q. Bevel adjustment knob
INTENDED USE
Your wet tile cutter has been designed for
professional tile cutting applications.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
These wet tile cutters are professional power tools.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
Electrical Safety
The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your DEWALT tool is double insulated in
accordance with EN 60745; therefore no
earth wire is required.
WARNING: 115 V units have to
be operated via a fail-safe isolating
transformer with an earth screen
To Next Page
Loading...
Need help?
General
