DeWalt DWD014 - Technical Data; Noise and Vibration Values; Vibration and Noise Emission Levels

4
ENGLISH
EC-Declaration of Conformity
Machinery Directive
Variable Speed Reversible Drill
DWD014, DWD014S
DeWALT declares that these products described under Technical
Data are in compliance with:
2006/42/EC, EN62841-1:2015+AC:2015, EN62841-2-
1:2018+A11:2019.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
DeWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
DeWALT.
Markus Rompel
Vice President of Engineering- PTE Europe
DeWALT, Richard-Klinger-Straße 11,
65510, Idstein, Germany
30.08.2021
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841
and may be used to compare one tool with
another. It may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of workpatterns.
DWD014 DWD014S DWD014S-XE
Voltage V
AC
230 230 230
Type 1 1 1
Power output W 550 550 550
No load speed /min 0–2800 0–2800 0–2800
Maximum drilling range: steel/wood mm 10/25 10/25 10/25
Torque Nm 7.9 7.9 7.9
Chuck spindle thread size UNF 1/2" x 20 1/2" x 20 1/2" x 20
Maximum chuck capacity mm 10 10 10
Weight kg 1.3 1.3 1.3
Noise values and/or vibration values (triax vector sum) according to EN62841-2-1:
L
PA
(emission sound pressure level) dB(A) 82 82 82
L
WA
(sound power level) dB(A) 93 93 93
K (uncertainty for the given sound level) dB(A) 5 5 5
Vibration emission value a
h
= m/s
2
6.7 6.7 6.7
Uncertainty K = m/s
2
1.5 1.5 1.5
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough product development and innovation make DeWALT one of the most
reliable partners for professional power toolusers.
Technical Data
English (original instructions)
VARIABLE SPEED REVERSIBLE DRILL
DWD014, DWD014S, DWD014SXE