Need help?Do you have a question about the DeWalt DWE490 and is the answer not in the manual?
General| Type | Angle Grinder |
|---|---|
| Power Source | Corded Electric |
| Motor Power | 3 HP |
| Spindle Lock | Yes |
| Wheel Diameter | 7 inches |
| Spindle Thread | 5/8-11 |
| Spindle Size | 5/8-11 |
Presents noise and vibration emission levels for surface grinding and disc sanding according to EN60745.
Defines the severity levels for DANGER, WARNING, CAUTION, and NOTICE signal words.
Covers work area, electrical, and personal safety precautions for power tool operation.
Provides instructions for proper use, maintenance, and storage of power tools.
Specific safety instructions for all operations and grinder usage.
Key checks and safety precautions to take before starting tool operation.
To Next Page
