49
English
RECOMMENDED BLADE TYPES
COMBINATION FRAMING 5/8" Round arbor, 24 teeth
All purpose fast rip and cross cuts.
PRESSURE TREATED/ 5/8" Round arbor, 20 teeth
WET LUMBER Coated - Resistant to gum build-up
EXTREME DURABILITY 5/8" Round arbor, 18 teeth
Coated, rock carbide
FINISHING
5/8" Round arbor, 36 teeth
More teeth for fi ner fi nish cuts.
FAST CUT FRAMING 5/8" Round arbor, 18 teeth
Fastest blade for rips and cross cuts
Protecting the Environment
Separate collection. This product must not be disposed of
with normal household waste.
Should you find one day that your D
EWALT product needs
replacement, or if it is of no further use to you, do not dispose of it
with household waste.
Separate collection of used products and packaging allows
materials to be recycled and used again. Re-use of recycled
materials helps prevent environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate collection of electrical
products from the household, at municipal waste sites or by the
retailer when you purchase a new product.
D
EWALT provides a facility for the collection and recycling of DEWALT
products once they have reached the end of their working life. To take
advantage of this service please return your product to any authorized
service center that will collect them on our behalf.
You can check the location of your nearest authorized service center
by contacting your local D
EWALT office. Alternatively, a service center
listing is included in the packaging of this product.
SPECIFICATIONS
DWE560-B3
Voltage 120 V ~ AC
Frequency 50–60 Hz
Power 1400 W
Rotation without Load 5500/min
To Next Page
Loading...
