Need help?Do you have a question about the DeWalt DWE7492 and is the answer not in the manual?
General| Motor Power | 2000 W |
|---|---|
| Blade Diameter | 250 mm |
| No Load Speed | 4800 rpm |
| Max. Cutting Depth at 90° | 77 mm |
| Table Size | 670 x 630 mm |
| Weight | 26.6 kg |
| Blade Bore | 30 mm |
| Max. Ripping Capacity [right] | 825 mm |
| Max. Ripping Capacity [left] | 558 mm |
| Sound Power | 106 dB(A) |
| Blade Diameter (inch) | 10 inch |
| Max Cut Depth at 90° | 77 mm |
| Max Rip Capacity | 825 mm |
| Weight (lbs) | 58.6 lbs |
| Table Size (inch) | 26.4 x 24.8 inch |
| Max. Cutting Depth at 45° | 57 mm |
| Max Cut Depth at 45° | 57 mm |
| Dust Port Size | 35 mm |
Formal statement of product compliance with EU directives and standards.
Explains hazard symbols like Danger, Warning, and Caution.
Guidelines for maintaining a safe and clean work environment.
Advice on safe use of power supply and avoiding electric shock.
Recommendations for operator protection, alertness, and attire.
Best practices for operating and maintaining power tools.
Emphasizes the importance and proper use of guards and riving knives.
Crucial safety advice for various cutting operations and techniques.
Explains kickback and how to prevent it.
Safety guidelines for machine setup and operation.
Further safety recommendations specific to table saw use.
Guidelines for selecting and using saw blades safely.
Information on voltage, earth wire, and extension cable use.
Details of included items and tool identification symbols.
Specifies the intended applications and materials for the saw.
General guidance on assembling the machine after unpacking.
Instructions for carefully removing the saw from its packaging.
Step-by-step guide for securely installing the saw blade.
Instructions for attaching the blade guard and riving knife.
Steps for installing and adjusting the throat plate.
Guide on how to install and position the rip fence.
Instructions for securely fixing the table saw to a workbench.
Procedures for aligning the blade parallel to the mitre slot.
How to raise and lower the saw blade.
Steps to correctly align the blade guard and splitter.
Adjusting the rip fence for parallel alignment and scale accuracy.
Adjusting the rip scale and securing the rail lock lever.
Calibrating bevel stops and adjusting the mitre gauge.
Recommendations for safe and effective body and hand placement.
Essential checks and safety warnings before starting operation.
General safety for cuts that go through the workpiece.
Step-by-step guide for ripping material with the saw.
Instructions for performing bevel, cross, and mitre cuts.
How to perform cuts that do not go through the material.
Techniques for non-through rips and bevel rips.
Methods for non-through crosscuts and mitre cuts.
Further details on non-through bevel crosscutting and mitreing.
How to connect and use the dust extraction system.
Guidelines for safely storing the table saw.
Steps to follow before moving the table saw.
How to maintain the saw through lubrication and cleaning.
Information on compatible accessories and blade specifications.
Guidelines for responsible disposal and recycling.
To Next Page
