Do you have a question about the DeWalt DWE7492 and is the answer not in the manual?
Motor Power | 2000 W |
---|---|
Blade Diameter | 250 mm |
No Load Speed | 4800 rpm |
Max. Cutting Depth at 90° | 77 mm |
Table Size | 670 x 630 mm |
Weight | 26.6 kg |
Blade Bore | 30 mm |
Max. Ripping Capacity [right] | 825 mm |
Max. Ripping Capacity [left] | 558 mm |
Sound Power | 106 dB(A) |
Blade Diameter (inch) | 10 inch |
Max Cut Depth at 90° | 77 mm |
Max Rip Capacity | 825 mm |
Weight (lbs) | 58.6 lbs |
Table Size (inch) | 26.4 x 24.8 inch |
Max. Cutting Depth at 45° | 57 mm |
Max Cut Depth at 45° | 57 mm |
Dust Port Size | 35 mm |