Need help?Do you have a question about the DeWalt DWE7485-CA and is the answer not in the manual?
General| Type | Table Saw |
|---|---|
| Blade Diameter | 8-1/4 in |
| Motor | 15 Amp |
| Arbor Size | 5/8 in |
| No Load Speed | 5800 RPM |
| Weight | 54 lbs |
| Max Rip to Right of Blade | 24-1/2 in |
| Max Rip to Left of Blade | 12 in |
| Dust Port Size | 2-1/2 in |
| Power Source | Corded Electric |
| Max Cut Depth at 90 Degrees | 2-9/16 in |
| Max Cut Depth at 45 Degrees | 1-3/4 inches |
Identifies and lists all parts of the table saw with corresponding numbers from diagrams.
Guidelines for maintaining a clean, well-lit, and safe work environment to prevent accidents.
Precautions to prevent electric shock, including proper grounding and cord care.
Advice on staying alert, using PPE, and preventing unintentional starting for operator safety.
Instructions on proper tool operation, maintenance, and storage to ensure safe and effective use.
Guidance on professional repair using identical replacement parts to maintain tool safety.
Emphasizes the importance of using and maintaining blade guards, riving knives, and anti-kickback pawls.
Critical safety advice for various cutting operations to prevent kickback and injury.
Specific safety precautions for table saw use, including material handling and positioning.
Covers safety regarding tool modification, PPE, and chemical exposure.
Instructions for unpacking the saw and identifying all included parts for assembly.
Defines the proper applications and materials for which the table saw is designed.
Provides a general introduction and initial steps for assembling the table saw.
Step-by-step guide on how to correctly install the throat plate for safe operation.
Instructions for safely removing the throat plate, typically for blade changes.
Detailed procedure for safely installing or replacing the saw blade, including safety precautions.
Instructions on how to attach and secure the rip fence to the table saw for ripping operations.
Guide on calibrating the rip scale indicator for accurate fence positioning.
Instructions for adjusting the rail lock lever to ensure the fence is securely clamped.
Steps for correctly installing and ensuring the anti-kickback assembly is functional.
Guidance on securely mounting the table saw to a workbench or stand.
Procedure for ensuring the saw blade is parallel to the miter slot for accurate cuts.
Instructions for setting the bevel angle stops and adjusting the angle pointer for accuracy.
Steps to ensure the rip fence is parallel to the saw blade for precise cuts.
Procedure for aligning the riving knife precisely with the saw blade to prevent kickback.
Guidance on choosing the correct saw blades and riving knife for optimal performance and safety.
Detailed explanation of kickback causes and how to avoid this dangerous condition.
Essential safety checks and precautions to perform before and during operation.
Instructions on operating the power switch and using the lock-off feature for safety.
How to use the blade guard's adjustable feature for better visibility during measurements.
How to properly lock and use the rip fence for ripping operations.
Step-by-step guide for safely performing ripping cuts using the table saw.
Step-by-step guide for safely performing crosscutting operations.
Instructions for performing crosscuts with the blade set at a bevel angle.
Instructions for performing crosscuts using the miter gauge set to an angle.
How to use the fine adjustment knob for precise fence setting.
Procedure for adjusting the rip scale pointer for accurate fence alignment.
Performing ripping cuts that do not go through the entire material thickness, like grooving.
Performing crosscuts that do not go through the entire material thickness.
Performing angled crosscuts that do not go through the entire material thickness.
Combining bevel and miter angles for complex non-through cuts.
How to set and use the miter gauge for non-through cutting operations.
Instructions for connecting and maintaining the dust collection ports for a cleaner workspace.
Information on the saw's reset switch and troubleshooting power interruptions.
Guidance on cleaning and lubricating the height adjustment screw for smooth operation.
Instructions for storing the anti-kickback assembly, blade guard, and wrenches.
Safety precautions and methods for safely transporting the table saw.
Guidance on constructing accessory items like a narrow rip auxiliary fence.
Instructions for building and using featherboards to guide workpieces and prevent kickback.
Guide on constructing a push block for safe feeding of narrow workpieces.
Procedures for cleaning air vents and the tool's exterior with safe materials.
Information on compatible accessories for enhanced functionality and safety.
Details on product registration, limited warranty, and customer support options.
To Next Page
