DeWalt DWE7485-CA - Safety Alert Symbols and Definitions; Component Identification

ENGLISH
1
English (original instructions)
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal injury or property damage.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or seriousinjury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or seriousinjury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderateinjury.

(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in propertydamage.

WARNING: Read all safety warnings and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or seriousinjury.
WARNING: To reduce the risk of injury, read the instructionmanual.
If you have any questions or comments about this or any product, call
DeWALT
toll free
at: (1-800-433-9258).
1
Table
2
Blade
3
Rip scale indicator
4
Fine adjust knob
5
Rail lock lever
6
Blade height adjustment wheel
7
Bevel lock lever
8
ON/OFF switch
9
Mounting holes
10
Miter gauge
11
Blade guard assembly
12
Anti-kickback assembly
13
Dust collection port
14
Guard dust collection port
15
Throat plate
16
Rip fence
17
Rip fence latch
18
Narrow ripping fence/support extension
19
Blade wrenches (stored position)
20
Push stick (stored position)
21
Riving knife (non thru cutting) (Fig.E)
22
Carry handle
23
Miter gauge track
24
Mounting holes (for mounting to
DW7440RS brackets)
Fig. A
2
14
11
1
19
22
13
3
10
8
11
15
7
5
20
18
16
17
4
6
12
9
9
23
24