DeWalt DWE560 - Product Technical Specifications; Technical Specifications; Noise and Vibration Values; Declaration of Conformity

6
ENGLISH
English (original instructions)
165 mm CIRCULAR SAW, DWE550
184 mm CIRCULAR SAW, DWE560
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
DWE550 DWE560
Voltage V
AC
230 230
UK & Ireland V
AC
230/115 230/115
Type 1 1
Power input W 1200 1350
No-load speed min
-1
5500 5500
Blade diameter mm 165 184
Maximum depth of cut at
90° mm 55 65
45° mm 35 42
Blade bore mm 20 16
Bevel angle adjustment 48˚ 48˚
Weight kg 3.60 3.66
Noise values and/or vibration values (triax vector sum) according to EN62841:
L
PA
(emission sound pressure level) dB(A) 93 93
L
WA
(sound power level) dB(A) 104 104
K (uncertainty for the given sound
level)
dB(A) 3 3
Cutting wood
Vibration emission value a
h,W
= m/s
2
<2.5 <2.5
Uncertainty K = m/s
2
1.5 1.5
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment ofexposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total workingperiod.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
workpatterns.
EC-Declaration of Conformity
Machinery Directive
Circular Saw
DWE550, DWE560
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2015, EN62841-2-5:2014.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DeWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofDeWALT.
Markus Rompel
Vice President of Engineering, PTE-Europe
DeWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
16.08.2017
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.

Denotes risk of electricshock.

Denotes risk offire.