DeWalt DWE7800 - Technical Data; Declarations of Conformity

ENGLISH
3
EC‑Declaration of Conformity
Machinery Directive
Drywall Sander
DWE7800
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN60745‑1:2009+A11:2010, EN60745‑2‑3:2011+
A2:2013+A11:2014+A12:2014+A13:2015.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DeWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofDeWALT.
Markus Rompel
Vice‑President Engineering, PTE‑Europe
DeWALT, Richard‑Klinger‑Straße 11,
65510, Idstein, Germany
17.12.2021
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
Drywall Sander
DWE7800
DeWALT declares that these products described under
Technical Data are in compliancewith:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN60745‑1:2009+A11:2010, EN60745‑2‑3:2011+A2:2013+
A11:2014+A12:2014+A13:2015.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact DeWALT at the following
address or refer to the back of the manual.
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN60745 and may be used to
compare one tool with another. It may be used for a preliminary
assessment ofexposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total workingperiod.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
workpatterns.
DWE7800
Voltage V
AC
230
UK & Ireland V
AC
115
Type 1
Power output W 450
Pad size
mm
225
Orbits
min‑1
1200–2400
Weight kg 4.3
Noise values and/or vibration values (triax vector sum) according to
EN60745‑2‑3:
L
PA
(emission sound pressure level) dB(A) 77
L
WA
(sound power level) dB(A) 88
K (uncertainty for the given sound level) dB(A) 2
Vibration emission value a
h
= m/s
2
< 2.5
Uncertainty K = m/s
2
1.5
Congratulations!
You have chosen a BernerDeWALT tool. Years of experience,
thorough product development and innovation make
BernerDeWALT one of the most reliable partners for professional
power toolusers.
Technical Data
English (original instructions)
DRYWALL SANDER
DWE7800