EasyManua.ls Logo

DeWalt DWH161N - Technical Data and Declarations; Noise Values; EC-Declaration of Conformity; Safety Guideline Definitions

DeWalt DWH161N
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
3
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.
Denotes risk of electricshock.
Denotes risk offire.
EC-Declaration of Conformity
Machinery Directive
Universal Dust Extractor
DWH161
DEWALT
declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN60335-1:2012 + A11:2014 + A13:2017;
EN60335-2-69:2012.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
DEWALT
at
the following address or refer to the back of themanual.
DWH161
Voltage V
DC
18
Type 1
Battery type Li-Ion
Max. flow rate L/s 9
Max. underpressure kPa 9.5
Hose diameter mm 26
Hose length m 1.0
Weight (without battery pack) kg 1.65
Noise values according to EN60335-2-69:
L
PA
(emission sound pressure level) dB(A) 66.3
L
WA
(sound power level) dB(A) 82.5
K (uncertainty for the given sound level) dB(A) 1.5
The vibration total value ah to which the hand-arm system is
subjected and measurements uncertainty K are determined in
accordance with ISO 5349-1, the machine being supplied at
ratedvoltage.
ah =<2.5 m/s
2
, K = 0.06 m/s
2
.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
DEWALT
.
Markus Rompel
Vice-President Engineering, PTE-Europe
DEWALT
, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
10.05.2019
Congratulations!
You have chosen a
DEWALT
tool. Years of experience, thorough
product development and innovation make
DEWALT
one of the
most reliable partners for professional power toolusers.
Technical Data
UNIVERSAL DUST EXTRACTOR
DWH161

Related product manuals