DeWalt DWS780N - Page 36

34
ENGLISH
English (original instructions)
MITRE SAW
DWS780, DWS780N
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough product development and innovation make DeWALT one of the most reliable partners for
professional power toolusers.
Technical Data
DWS780
QS/GB
DWS780
LX
DWS780N
QS/GB
DWS780N
LX
Voltage
V
AC
230 115 230 115
Type
12 12 10 10
Power input
W 1675 1675 1675 1675
Blade diameter
mm 305 305 305 305
Blade bore
mm 30 30 30 30
Blade body thickness
mm 1.8 1.8 1.8 1.8
Max. kerf thickness
mm 3.0 3.0 3.0 3.0
Max. blade speed
min
-1
1900–3800 1900–3600 4100 3900
Max. cross-cut capacity 90°
mm 349 349 349 349
Max. mitre capacity 45°
mm 244 244 244 244
Max. depth of cut 90°
mm 112 112 112 112
Max. depth of bevel cross-cut 45°
mm 56 56 56 56
Mitre (max. positions)
left 50° 50° 50° 50°
right 60° 60° 60° 60°
Bevel (max. positions)
left 49° 49° 49° 49°
right 49° 49° 49° 49°
0° mitre
Resulting width at max. height 112 mm
mm 299 299 299 299
Resulting width at max. height 110 mm
mm 303 303 303 303
Resulting height at max. width 345 mm
mm 76 76 76 76
45° mitre left
Resulting width at max. height 112 mm
mm 200 200 200 200
Resulting height at max. width 244 mm
mm 76 76 76 76
45° mitre right
Resulting width at max. height 112 mm
mm 211 211 211 211
Resulting height at max. width 244 mm
mm 76 76 76 76
45° bevel left
Resulting width at max. height 63 mm
mm 268 268 268 268
Resulting height at max. width 345 mm
mm 44 44 44 44
45° bevel right
Resulting width at max. height 62 mm
mm 193 193 193 193
Resulting height at max. width 345 mm
mm 28 28 28 28
Automatic blade brake time
s < 10 < 10 < 10 < 10
Weight
kg 25.5 25.5 25.5 25.5
XPS Energy Efficiency
F F F F
Noise values and/or vibration values (triax vector sum) according to EN62841
L
PA
(emission sound pressure level) dB(A) 92 90 92 92
L
WA
(sound power level) dB(A) 105 102 105 102
K (uncertainty for the given sound level) dB(A) 3 3 3 3
The vibration and/or noise emission level given in this information sheet has
been measured in accordance with a standardised test given in EN62841
and may be used to compare one tool with another. It may be used for a
preliminary assessment ofexposure.

WARNING: The declared vibration and/or noise emission level
represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly
maintained, the vibration and/or noise emission may differ. This may
significantly increase the exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/or noise should
also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly
reduce the exposure level over the total workingperiod.
Identify additional safety measures to protect the operator from
the effects of vibration and/or noise such as: maintain the tool