EasyManua.ls Logo

DeWalt DXCMLA3706056

DeWalt DXCMLA3706056
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DXCMLA3706056
Single Stage, Belt Drive, Electric Air Compressors
Compresseurs d’air électriques à un étage à entraînement par courroie
Compresores eléctricos de aire, de una sola etapa y accionamiento por correa
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y
PÓLIZA DE GARANTÍA. ADVERNTENCIA: LÉASE ESTE
INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-888-895-4549 • www.dewalt.com
MAT Industries, LLC, Long Grove, IL 60047
(JUNE12) Part No. 200-2892 DXCMLA3706056 Copyright © 2007, 2008, 2009, 2010 DEWALT

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the DeWalt DXCMLA3706056 and is the answer not in the manual?

DeWalt DXCMLA3706056 Specifications

General IconGeneral
Quantity per pack1 pc(s)

Summary

Risk of Explosion, Fire, and Breathing Hazards

Risk of Explosion or Fire

Warns about potential ignition of flammable vapors and overheating.

Risk to Breathing (Asphyxiation)

Alerts to dangers of inhaling compressed air contaminants and chemical dust.

Risk of Tank Bursting and Accessory Hazards

Risk of Bursting

Explains tank life, corrosion risks, and how to prevent rupture.

Risks During Transport, Storage, and Operation

Risk of Injury or Property Damage During TransportStorage

Covers risks of oil leaks during transport and storage precautions.

Risks of Hot Surfaces and Electrical Shock

Risk of Electrical Shock

Warns about hazards of electric shock when operating the unit.

Risks of Unsafe Operation and Moving Parts

Risk of Unsafe Operation

Covers general unsafe practices leading to injury or death.

Electrical Requirements and Wiring

Wiring Instructions and Safety

Provides guidelines for safe and proper electrical wiring installation.

Grounding and Voltage Protection

Details grounding requirements and voltage/circuit protection.

Operating Procedures and Break-in

Unit Operation and Break-in Procedure

Guides on how to use the unit, stop, start, and perform the initial break-in.

Starting and Shutting Down the Compressor

How to Start the Compressor

Instructions for starting the compressor and using accessories.

Compressor Shut-down Procedure

Steps for safely shutting down and storing the compressor.

Maintenance Schedule and Procedures

Routine Maintenance Chart

A chart detailing daily, weekly, and annual maintenance tasks.

Specific Maintenance Checks

Checking the Safety Valve

Procedure to test and ensure the safety valve is functioning correctly.

Compressor Pump Oil and Belt Maintenance

Compressor Pump Oil Procedures

Guidance on checking, changing, and the type of oil to use.

Belt and Pulley Alignment

Component Checks and Service

Troubleshooting Guide

Common Malfunctions and Causes

Lists frequent problems, their potential causes, and corrective actions.

Troubleshooting Codes (Continued)

Troubleshooting Codes and Glossary

Related product manuals