To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DXCMSAC426 and is the answer not in the manual?
General| Power Source | Electric |
|---|---|
| CFM at 90 PSI | 4.0 CFM |
| Motor | Induction |
| Voltage | 120V |
| Amperage | 15 Amps |
| Noise Level | 78 dBA |
| Type | Portable |
Identifies key parts of the air compressor unit with labels A through J.
Details oil-free, direct drive, voltage, and circuit requirements for the compressor.
Explains signal words (DANGER, WARNING, CAUTION, NOTICE) and their severity levels.
Crucial warnings before operating the unit, including lead content and California warnings.
Details causes and prevention of fire and explosion hazards related to the compressor.
Addresses hazards of inhaling contaminated air and chemical exposure.
Explains conditions leading to air tank weakening and potential explosion.
Covers safe use of tools, spray guns, inflatables, and tire inflation.
Warns about compressed air stream hazards and necessary safety equipment.
Alerts users to the danger of touching hot compressor parts.
Covers grounding, wiring, and wet condition operation risks.
Addresses general unsafe practices, fatigue, and environmental factors.
Warns about moving parts, lifting injuries, and recommends hearing protection.
Describes key features like switches, gauges, regulator, and quick connect.
Guides on unpacking, inspecting, and connecting air hoses safely.
Covers oil-free lubrication, tool compatibility, and proper placement.
Details electrical connection requirements and grounding safety.
Specifies requirements for extension cords and voltage/circuit protection.
Outlines steps for initial setup, break-in, and pre-start checks.
Explains the process for starting, operating, and stopping the air compressor.
Provides a schedule for routine checks and safety valve testing.
Details how to inspect and maintain the air intake filter.
Explains how to drain the tank and check for air leaks.
Covers servicing of air compressor pump intake and exhaust valves.
Provides guidance on obtaining service, repairs, and accessory information.
Details warranty terms, duration, coverage, and specific exclusions.
Outlines warranty for separate parts and how to access service.
Information on obtaining replacement warning labels if original ones are missing.
Defines common terms and acronyms used in the manual.
Lists common problems, their possible causes, and solutions with associated codes.
