What to do if my DeWalt DXH165 unit does not work?
If your DeWalt Heater isn't working, the possible causes include: * A defective thermostat or incorrect thermostat setting. * An open circuit breaker or fuse. * A tripped thermal overload switch. * A faulty connection. * A damaged or defective plug or outlet.
What to do if my DeWalt DXH165 isn't reaching the desired room temperature?
If your DeWalt Heater isn't reaching the desired room temperature, it could be due to several reasons: * One or more elements may be defective. * The thermostat might be defective or set incorrectly. * The voltage could be lower than what's indicated on the rate tag. * Heat losses might be higher than the unit's capacity, indicating it's undersized.
Why is my DeWalt DXH165 overheating?
Your DeWalt Heater might be overheating due to a defective thermostat, an incorrect thermostat setting, or a defective motor.
Why is my DeWalt Heater running continuously?
If your DeWalt Heater is running continuously, it could be due to a defective thermostat, an incorrect thermostat setting, or because heat losses are higher than the unit's capacity, meaning the unit is undersized.
What to do if elements are on but motor does not rotate in DeWalt DXH165?
If the elements in your DeWalt Heater are on but the motor isn't rotating, the issue might be a defective motor, a tripped thermal overload switch, or blocked fan blades.
Why is the enclosure of my DeWalt Heater extremely hot?
If the enclosure of your DeWalt Heater is extremely hot, it could be due to defective thermal protection, blocked air vents, or a defective motor.
Comprehensive safety warnings and precautions for operating the heater safely.
Comprehensive list of all components with reference numbers and descriptions.
General| Heating Capacity | 165, 000 BTU |
|---|---|
| Voltage | 120 V |
| Weight | 25 lbs |
| Dimensions | 24 x 14 x 13 inches |
| Safety Features | Overheat protection, Tip-over switch |
| Heater Type | Forced Air |
| Fuel Type | Diesel |
To Next Page
