Safety Notes Woodworking
Before attempting any repairs, the following should be observed,
Ensure that the correct tool is used and only use good quality hand tools.
Ensure the work shop is clean and tidy.
Always wear protective clothing, Overalls, safety gloves, safety glasses, safety hat/net etc.
Check that guards function correctly, if not repair before running the product.
Before turning product on for analysis carry out a visual check for loose/broken parts Including accessories,
blades, cutters etc.
Remove accessories, blades, cutters etc
Release tension on parts before attempting to remove, for example arm springs.
Use Anti-Static control where necessary.
Before repair ensure battery is removed.
To Next Page
Loading...
