To Next PageTo Next Page
Need help?Do you have a question about the DeWalt 12" COMPOUND MITER SAW DW705 and is the answer not in the manual?
General| Blade Diameter | 12 inches |
|---|---|
| Amperage | 15 amps |
| No Load Speed | 4, 000 RPM |
| Dust Collection | Yes |
| Electric Brake | Yes |
| Sliding | No |
| Miter Capacity | 50 degrees left, 50 degrees right |
| Arbor Size | 1 inch |
| Miter Angle Range | 0-50 degrees |
| Bevel Angle Range | 0-48 degrees |
Essential safety rules applicable to all power tools.
Additional safety guidelines tailored for miter saw operation.
Connecting the saw to power and checking carton contents.
Identifying and understanding the different parts of the miter saw.
Detailed technical data and maximum cutting capabilities.
List and description of available accessories to enhance saw functionality.
Instructions for securely attaching the saw to a workbench.
Step-by-step process for changing the saw blade.
Installing optional extension kits and adjusting the rear lower guard.
Guidelines for safely carrying and moving the miter saw.
Procedures for accurately adjusting the miter scale and pointer.
Ensuring the blade is precisely square to the saw table.
Adjusting the bevel pointer and setting bevel angle stops.
Adjusting the fence and understanding the guard's function.
Information on the automatic brake and brush care.
How to operate the saw's switch and basic usage.
Methods for making crosscuts and bevel cuts.
Factors influencing the smoothness and precision of cuts.
Guidelines for safe and accurate body and hand placement.
Techniques for clamping and supporting workpieces during cuts.
Cutting techniques for four-sided projects like frames.
Cutting trim molding for various framing applications.
Introduction to making cuts with both miter and bevel angles.
Understanding and using the miter scale ranges and vernier scale.
Methods for cutting various types of base molding.
Cutting base molding wider than 3-7/8" vertically.
Techniques for cutting base molding laid flat on the saw.
Step-by-step guide for cutting crown molding accurately.
Alternative and detailed methods for cutting crown molding.
Guidance for performing specialized cutting tasks like aluminum or plastic.
Information on routine maintenance and professional repair.
Coverage details for the limited warranty and guarantees.
