Need help?Do you have a question about the DeWalt DW705 120 Volt and is the answer not in the manual?
General| Voltage | 120 Volt |
|---|---|
| Type | Compound Miter Saw |
| Amperage | 15 Amps |
| No Load Speed | 4, 000 RPM |
| Blade Diameter | 12 inches |
Explains double insulated tool construction for user safety.
Describes polarized plugs to reduce electric shock risk.
Lists specific DO's and DON'Ts for operating miter saws safely.
Warns about hearing loss, dust, and chemical exposure risks.
Highlights safety labels found on saw components.
Details items in carton and guides identification of saw parts.
Lists technical capacities, motor details, and RPM for the saw.
Lists available accessories and various saw blade types for different applications.
Instructions and precautions for securely mounting the saw to a workbench.
Warns against using non-recommended accessories for safety and performance.
Step-by-step guide for safely installing a new saw blade.
Procedure to calibrate the miter scale for accurate angle measurements.
Steps to align the miter pointer with the scale for precise settings.
How to ensure the blade is square to the table for bevel cuts.
How to adjust the bevel pointer and set the bevel stop accurately.
Guidance on adjusting the fence for clearance and workpiece support.
Information on the automatic blade guard's function and visibility.
Details on the electric brake function and brush maintenance.
How to operate the saw's switch and general usage guidelines.
Covers crosscuts, bevel cuts, and achieving quality cuts.
Guidance on body position, clamping, and supporting workpieces safely.
Techniques for cutting frames, boxes, molding, and compound miters accurately.
Using dual range and vernier scales for accurate miter angle settings.
Instructions for straight, vertical, and corner cuts of base molding.
Instructions for cutting wider base molding vertically against the fence.
How to cut inside and outside corners of base molding using specific angles.
Provides precise miter and bevel settings for common crown molding cuts.
Describes a method requiring no bevel cuts, using an accessory for accuracy.
Specific bevel settings and cut types for crown molding.
Detailed instructions for inside and outside corner cuts of crown molding.
Positioning molding and cutting inside corners for angled crown molding.
How to cut outside corners and general advice for special cuts.
Techniques for cutting aluminum, round, and large materials safely.
Instructions for cleaning bearings, dust removal, and brush checks.
Details on DEWALT warranty, satisfaction guarantee, and label replacement.
Common reasons and solutions for the saw failing to power on.
Diagnosing and fixing issues causing poor quality or incorrect cuts.
Troubleshooting slow blade speed and excessive machine vibration.
Solutions for inaccurate miter cuts and blades being pinched by material.
To Next Page
