Need help?Do you have a question about the DeWalt DW704 and is the answer not in the manual?
General safety guidelines for operating power tools to prevent injury, fire, and electric shock.
Specific safety advice applicable to mitre saws, including guard operation and blade handling.
Crucial electrical safety information, including voltage checks and double insulation.
Step-by-step instructions for safely replacing the mains plug on UK/Ireland models.
Guidelines for selecting and using appropriate extension cables based on power requirements.
Instructions for safely removing the saw from its packaging and listing package contents.
Identifies and labels all the main parts of the mitre saw using figures.
General advice on assembling the tool, emphasizing unplugging it first.
Details on how to securely mount the mitre saw to a workbench or plywood.
How to adjust the rear lower guard for proper blade centering and clearance.
Instructions for cutting a new kerf in the plate for blade clearance.
Specific procedure for DW705 to widen the kerf for 45° bevel cuts.
How to check and adjust the blade's alignment with the fence for accurate cuts.
Steps to precisely adjust the mitre pointer for accurate angle settings.
Procedure to ensure the blade is perpendicular to the saw table.
Detailed steps for adjusting the bevel stop mechanism on DW705 models.
Instructions for adjusting the left side fence for clearance and proper support.
How to check and adjust the bevel angle settings for precise cuts.
How to operate the power switch and secure the tool when not in use.
Procedure for making a straight 90-degree cut on the mitre saw.
How to perform a vertical cut with a mitre angle adjustment.
Steps for making bevel cuts on the DW705 model.
Guidance on cutting specific types of projects like frames and boxes.
How to use the bevel adjustment for specific types of cuts on the DW705.
Instructions on using the mitre adjustment for various cuts.
Detailed guide on performing compound mitre cuts on the DW705.
Explanation of how to use the dual range mitre scale for accurate angle settings.
How to use the vernier scale for precise angle measurements and settings.
Step-by-step guide for cutting base mouldings.
Instructions for making straight 90-degree cuts on mouldings.
How to perform 45-degree mitre cuts on mouldings.
Using bevel adjustment for horizontal cuts on DW705.
Information about the recommended saw blades and their specifications.
Guidelines and precautions for cutting non-ferrous metals.
Notes that the power tool requires no additional lubrication.
How to clean the saw's housing and ventilation slots.
Offers a full refund or exchange within 30 days if not completely satisfied.
Provides free maintenance and service for 12 months after purchase.
Covers replacement of defective parts or the entire unit within 12 months.
To Next Page
General
