DeWalt DW704 - Technical Specifications

en - 1 18
ENGLISH
MITRE SAW DW704/DW705
Congratulations!
You have chosen a DEWALT Power Tool. Years of experience, thorough
product development and innovation make DEWALT one of the most
reliable partners for professional Power Tool users.
Table of contents
Technical data en - 1
EC-Declaration of conformity en - 1
Safety instructions en - 2
Electrical safety en - 2
Mains plug replacement (U.K. & Ireland only) en - 3
Using an extension cable en - 3
Unpacking en - 3
Description en - 3
Assembly en - 3
Adjustment en - 4
Instructions for use en - 5
Transport en - 8
Maintenance en - 8
Guarantee en - 8
Technical data
DW704 DW705
Voltage V 230 230
(U.K. & Ireland only) V 115 115
Power input W 1,500 1,500
Blade diameter mm 305 305
Blade bore ø mm 30 30
Max. blade speed min 3,800 3,800
Max. cross-cut capacity 90° mm 200 200
Max. mitre capacity 45° mm 140 140
Max. depth of cut 90° mm 90 90
Max. depth of bevel cross-cut 45° mm - 58
Mitre (max. positions) left 48° 48°
right 48° 48°
Bevel (max. positions) left - 48°
right - 3°
0° mitre
Resulting width at max. height 90 mm mm 150 150
Resulting height at max. width 200 mm mm 58 58
45° mitre
Resulting width at max. height 90 mm mm 105 105
Resulting height at max. width 140 mm mm 58 58
45° bevel
Resulting width at max. height 58 mm mm - 150
Resulting height at max. width 200 mm mm - 43
Automatic electronic blade brake time s < 10.0 < 10.0
Weight kg 16.3 17.2
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
115 V tools (< 1500 W) 15 Amperes, mains
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or damage to the
tool in case of non-observance of the instructions in this
manual.
Denotes risk of electric shock.
EC-Declaration of conformity
DW704/DW705
DEWALT declares that these Power Tools have been designed in
compliance with: 89/392/EEC, 89/336/EEC, 73/23/EEC, EN 50144,
EN 55104, EN 55014, EN 61000-3-2 & EN 61000-3-3.
For more information, please contact DEWALT at the address below or
refer to the back of the manual.
Level of sound pressure according to 86/188/EEC & 89/392/EEC,
measured according to EN 50144:
DW704 DW705
L
pA
(sound pressure) dB(A)* 88,4 89,3
L
WA
(acoustic power) dB(A) 101,4 97,3
* at the operator’s ear
Take appropriate measures for the protection of hearing if the
sound pressure of 85 dB(A) is exceeded.
Weighted root mean square acceleration value according to EN 50144:
DW704 DW705
< 2.5 m/s
2
< 2.5 m/s
2
TÜV Rheinland
Sicherheit und Umweltschutz GmbH
Am Grauen Stein
D-51105 Köln
Germany
Cert. No.
R 9610618
Director Engineering & Product Development
Horst Großmann
DEWALT, Richard-Klinger-Straße 40,
D-65510, Idstein, Germany