DeWalt DW707 User Manual

DW706 (120 Volt) DW706 (230 Volt)
12" Double Bevel Compound Miter Saw
Scie à onglet à angles combinés à biseau double de 30,5 cm (12 po)
Sierras de ingletes de bisel doble del 30,5 cm (12")
INSTRUCTION MANUAL
GUIDE D´UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA
DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES
DE USAR EL PRODUCTO.
Before returning this product call
1-800-4-D E WALT
IF YOU SHOULD EXPERIENCE A PROBLEM WITH YOUR DEWALT PURCHASE,
CALL 1-800-4 DEWALT
IN MOST CASES, A DEWALT REPRESENTATIVE CAN RESOLVE
YOUR PROBLEM OVER THE PHONE.
IF YOU HAVE A SUGGESTION OR COMMENT, GIVE US A CALL.
YOUR FEEDBACK IS VITAL TO THE SUCCESS OF D
EWALT'S
QUALITY IMPROVEMENT PROGRAM.
Questions? See us in the World Wide Web at www.dewalt.com

DeWalt DW707 Specifications

General

Brand	DeWalt
Model	DW707
Category	Saw
Language	English

Summary

Important Safety Instructions

Double Insulation

Explains the double insulation system for enhanced electrical safety and the implications for grounding.

Polarized Plugs

Details the use of polarized plugs to reduce electric shock risk and proper outlet connection.

Safety Instructions For All Tools

Additional Safety Rules For Miter Saws

Electrical Connection

Specifications

Changing or Installing a New Saw Blade

Removing the Blade

Step-by-step guide on how to safely remove the saw blade, including safety precautions.

Installing a Blade

Step-by-step guide on how to safely install a new saw blade, emphasizing correct alignment and tightening.

Guard Actuation and Visibility

Brushes

Controls

Miter Control

Bevel Lock

Operation

Cutting With Your Saw

General guidance on making cuts with the miter saw, emphasizing safety and proper technique.

Crosscuts

Instructions for making straight and angled crosscuts across the grain of the wood.

Bevel Cuts

How to perform bevel cuts by adjusting the saw's angle relative to the workpiece for angled cuts.

Quality of Cut

Body and Hand Position

Clamping the Workpiece

Adjustments

Miter Scale Adjustment

Miter Pointer Adjustment

Bevel Square to Table

Bevel Pointer

Adjusting the Bevel Stop to 45° Left or Right

Adjusting the Bevel Stop to 33.85°

Fence Adjustment

Automatic Electric Brake

Information about the automatic electric brake, its function, and troubleshooting for delays or engagement issues.

Cutting Picture Frames, Shadow Boxes and Other Four Sided Projects

Cutting Trim Molding and Other Frames

Cutting Compound Miters

Cutting Base Molding

Cutting Base Molding Up to 6" High Vertically Against the Fence

Cutting Crown Molding

Instructions for Cutting Crown Molding Laying Flat and Using the Compound Features

Alternative Method for Cutting Crown Molding

Special Cuts

Troubleshooting Guide

Saw Will Not Start

Lists common reasons why the saw fails to start and the corresponding solutions.

Saw Makes Unsatisfactory Cuts

Identifies issues leading to poor cuts and provides steps for correction, such as blade replacement.

Blade Does Not Come Up to Speed

Explains potential causes for the blade's slow acceleration, like cord issues or low voltage.

Machine Vibrates Excessively

Does Not Make Accurate Miter Cuts

Outlines common reasons for inaccurate miter cuts and how to adjust scales and fences.

Material Pinches Blade

Maintenance

Repairs