DeWalt XR DCG409VS Original Instructions

61
ENGLISH
Application Accessory Type Accessory Guard Correct Assembly
Dual
Purpose
(combined
cut‑off and
grinding)
Dual Purpose Abrasive Wheel
Type A (Closed cut off)
1
1
Maximum wheel thickness, 6 mm.
Wire
Brushing
Wheel‑Type Wire Brush
Type A or Type B (Closed cut off or Grinding)
2, 5
2
Type B guard available at additional cost from your local DeWALT dealer or authorised DeWALT service centre.
5
Maximum wire wheel thickness, 20mm.
Cup Type Wire Brush
Type B (Grinding)
2
2
Type B guard available at additional cost from your local DeWALT dealer or authorised DeWALT service centre.
Sanding
Flap Disc (Type 27 / Type 29)
Type B (Grinding)
2
2
Type B guard available at additional cost from your local DeWALT dealer or authorised DeWALT service centre.
Flexible Abrasive
(e.g. sandpaper)
(supported by a flexible
backing pad)
Guard not required
6
6
Rubber backing pad and sanding clamp nut (included with rubber backing pad) available at additional cost from your
local DeWALT dealer or authorised DeWALT service centre.
Guidelines for Guards and Accessories for DCG409VS, DCG416VS
Non-approved Wheels for
DCG409VS, DCG416VS
Type 11/ T11
Hubbed Wheel Wrench
Hubbed wheel wrench available at additional
cost from your local DeWALT dealer or authorised
DeWALT servicecentre
.

DeWalt XR DCG409VS Specifications

General

Brand	DeWalt
Model	XR DCG409VS
Category	Power Tool
Language	English