Need help?Do you have a question about the DeWalt XR DCH481 and is the answer not in the manual?
General| Type | Rotary Hammer |
|---|---|
| Max. Drilling Capacity (Concrete) | 40 mm |
| Battery Type | Li-Ion |
| Chuck Type | SDS Plus |
| Impact Energy | 6.1 Joules |
| Blows per Minute | 0- 4, 600 bpm |
| Drilling Modes | Hammer, Chisel |
| Voltage | 18V/54V |
| Battery Compatibility | 18V XR and 54V XR FLEXVOLT batteries |
Lists key product specifications and measurements for the DCH481.
Confirms product compliance with European Union directives and standards.
Confirms product compliance with relevant United Kingdom safety regulations.
Guidelines for maintaining a safe and organized work environment to prevent accidents.
Precautions to prevent electric shock and ensure safe use of electrical components.
Emphasizes user alertness, proper PPE, and preventing accidental activation.
Instructions for correct operation, maintenance, and general care of the power tool.
Safety guidelines for using, charging, and storing battery packs.
Specific safety advice for hammer operations and drill bits.
Discusses inherent risks associated with rotary hammers that cannot be fully eliminated.
Details electrical safety requirements for the tool and charger.
Crucial safety information for battery chargers.
Essential safety advice for charging DEWALT batteries.
Guidelines for using extension cords with chargers.
Step-by-step process for charging a battery pack.
Explains charger lights and operation modes.
Explains the tool's protection against overloading and overheating.
Guidance on how to mount the charger on a wall.
Safety and procedures for cleaning the charger.
Regulations and advice for transporting batteries.
Explains transport mode and shipping regulations for FLEXVOLT™ batteries.
Describes pictograms found on chargers and battery packs.
Advice on optimal storage conditions for battery packs.
Explains the meaning of pictograms and the date code location.
Lists and describes the main components of the tool.
Specifies the applications the tool is designed for.
Explains the function of the overload and mechanical clutches.
Explains how to check the remaining charge on the battery pack.
Guidance on fitting and using bits and the SDS-Max holder.
Demonstrates the correct way to hold the tool for safety.
Explains how to select between different tool operating modes.
Specific recommendations for drilling and diamond drilling applications.
General guidance on maintaining the power tool for longevity.
How to properly clean the tool and avoid damage.
Information on compatible accessories and their usage.
To Next Page