EasyManua.ls Logo

Dewenwils HODT12F - Page 2

Dewenwils HODT12F
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
01
CAUTION
• Suitable for use with outdoor appliances.
• For use ONLY with a three conductor GFCI protected outlet.
• Raintight when mounted vertically with receptacles facing downward.
• Do not immerse in water.
• DO NOT EXCEED RATED CAPACITY.
• The device must be mounted in a vertical position with the receptacle
facing downward and with the receptacle at least 2 FT above the ground
level.
• Cord-connected Operating Control.
• Temperature limits of the SWITCH HEAD: -40-40ºC.
1. Mount or hang the RECEIVER on the wall near a GFCI protected outlet
(125V 60Hz) which the power supply cord of the RECEIVER will plug into.
2. Plug the cord of the device you wish to control at the bottom.
Installation
Receiver
power sensor
2 Hrs 4 Hrs
6 Hrs 8 Hrs
2
1
3
4

Related product manuals