This document describes the Dewenwils Power Saving Strip Timer, SKU: HPST16M, an indoor mechanical power strip designed to help manage power consumption for various devices. It features a 24-hour daily repeat function and is capable of handling lighting and heavy-duty loads.
Function Description
The Dewenwils Power Saving Strip Timer is a power strip equipped with a mechanical timer that allows users to program specific ON/OFF times for connected devices. Its primary function is to save energy by automatically turning off appliances when they are not needed, thereby reducing electricity consumption and potential fire hazards from continuously active heating elements. The timer operates on a 24-hour cycle, making it suitable for daily recurring tasks.
Usage Features
The power strip is designed for ease of use with several distinct features:
- Main Power and Overload Protection: A red switch serves as the main power switch and provides overload protection, ensuring the safety of connected devices and the power strip itself.
- Timer Mode Switch: This switch allows users to select one of three modes for the timer-controlled outlets:
- Always ON (I): The timer-controlled outlets remain continuously powered.
- Always OFF (O): The timer-controlled outlets remain continuously unpowered.
- Timer Control (T): The outlets operate according to the programmed ON/OFF schedule set on the timer dial.
- Timer Dial: The central timer dial is a key component for programming. It has 48 pins (slices) around its circumference, with each pin representing a 30-minute increment. Users can set the current time by rotating the dial clockwise until a gray dot aligns with the current time. The dial is visually divided into white and black semicircles, representing 7 AM - 6 PM and 7 PM - 6 AM, respectively, to aid in time setting.
- Setting ON/OFF Times: To program the timer, all pins should initially be in the pulled-up position, which signifies OFF. Users then push down the pins corresponding to the periods when they want the connected devices to be ON. Pins in the down position represent ON, while pins in the up position represent OFF.
- Outlet Configuration: The power strip features eight outlets in total:
- Four "TIMER control" outlets: These outlets are governed by the settings on the timer dial and the timer mode switch.
- Four "SWITCH control" outlets: These outlets are controlled by the main red power switch. When the main switch is ON, these four outlets are ON; when the main switch is OFF, they are OFF.
- Installation: To install, simply plug the power strip into a standard 125VAC outlet. Before programming, the red switch should be pushed to the "RESET" mode.
Maintenance Features
While the manual does not explicitly detail maintenance features, it provides crucial warnings and guidelines that contribute to the longevity and safe operation of the device:
- Risk Reduction: Users are advised to follow instructions precisely to reduce the risk of fire, electric shock, or personal injury.
- Load Management: It is critical not to connect devices that exceed the maximum ratings of the timer. This prevents overloading and potential damage to the power strip and connected appliances.
- Appliance Compatibility: The timer should not be connected to appliances containing heating elements (such as cooking appliances, heaters, irons, etc.). Failure to turn off such appliances can lead to overheating and potential fire, highlighting the importance of understanding which devices are suitable for timer control.
- Environmental Protection: The device should not be immersed in water, protecting its internal components from damage.
- Supervision and Repair: Children should not use the timer without supervision. Furthermore, users are explicitly warned not to disassemble or repair the device themselves, except by authorized service staff, to prevent damage and ensure safety.
- Unexpected Turn-On Warning: A significant safety warning indicates that the timer could turn on unexpectedly without the user being present. To mitigate this hazardous condition, users should unplug any appliance connected to the timer-controlled receptacles before servicing.
- Electrical Safety: A caution against electric shock advises users not to plug the power strip into another relocatable power tap or an extension cord, ensuring proper electrical grounding and preventing potential hazards.
- Warranty and Support: The product comes with a one-year limited warranty, covering defects in material and workmanship. This provides a mechanism for users to address issues and ensures the device's reliability. The warranty is void if damage is caused by misuse or improper installation, reinforcing the importance of following the provided instructions. Dedicated customer service is available via email to assist with any questions or issues, ensuring ongoing support for users.
Need help?
General
To Next Page
