02
1. Sensor ( ):
Sensor will turn receiver on at dusk and off at dawn.
2. Operating Mode:
Timer will turn ON, 2, 4, 6, or 8 hours after dusk.
3. Select button:
Select the function repeatedly.
Power ON Sensor ( ) 2H 4H 6H 8H OFF ON
4. Outlets:
Plug the lights or devices to be controlled by the timer into one of
the outlets.
ON: Power is ON to attached devices
Sensor ( Dusk - Dawn): power will turn on at dusk and remain on
until dawn
2 Hrs: Power will turn on at dusk and remain on for 2 hours
4 Hrs: Power will turn on at dusk and remain on for 4 hours
6 Hrs: Power will turn on at dusk and remain on for 6 hours
8 Hrs: Power will turn on at dusk and remain on for 8 hours
OFF: Power is OFF to attached devices
* Note The timer has a daily repeat after setting, in case of power failure, it
will stop operating when the power goes out. Once power is restored,
reset the desired operating mode as the operating instructions.
Helpful Tips
• When set to “ON”, the timer will provide continuous power to attached
devices until the timer is switched to “OFF”, or to any of the other operating
modes.
To Next Page
Loading...
