Operating Instructions
1. Disconnect power by circuit breaker.
2. Check the Line with voltage tester pen, make sure the power is off to
prevent electric shock.
3. Follow the wiring instructions, connect the dimmer wires to each other
leads and check for short circuits.
4. Screw the dimmer into the back box.
5. Mounting switch cover plate.
6. Connect circuit breaker restore power.
Download the “dewenwils" App: Scan QR Code or search "dewenwils" in
Google Play or the App Store to download and install the app.
Note: All pictures shown are for illustration purpose only, the APP will be
updated continuously, please refer to the latest APP interface to operate.
1.Download APP
03
Free APP for android and IOS
To Next Page
Loading...
