10
English
Call waiting
If you subscribe to a call waiting service from your telephone service provider, you hear an alert
tone when there is an incoming call while you are on another call�
1� Press
q
/ FLASH to put the current call on hold to take the new call�
2� Press
q
/ FLASH to switch back�
Volume control
During a call, press
{
/
}
to adjust the listening volume�
Note!
The handset earpiece volume setting and speakerphone volume setting are independent.
Mute
1� During a call press MUTE / REMOVE to turn off your microphone� MUTE is displayed when
activated�
2� Press MUTE / REMOVE to turn on your microphone� The screen temporarily displays
MICROPHONE ON�
Temporary silent mode
When someone calls, you can press
L
/ CLEAR or MUTE / REMOVE on the handset to turn
off the handset ringsignal� RINGER MUTED is displayed� The next call rings automatically at
the present volume�
Directory
You can save up to 50 entries in the directory� Only one handset can review the directory at a
time� Any modifications made on one handset apply to all�
Save contact
1� Press MENU / SELECT�
2� Select DIRECTORY â ADD CONTACT�
3� Press the dialing keys (0-9) to enter the number (up to 30 digits)� When done, press MENU
/ SELECT�
• If needed, press MUTE / REMOVE to delete a digit� Press and hold MUTE / REMOVE to
delete the entire entry�
4� Press the dialing keys (0-9) to enter name (up to 15 characters)� Press the equivalent key
several times for the wanted letter� When done, press MENU / SELECT to save�
• If needed, press 0 to add a space�
To Next Page
Loading...