Dexin NDS3208 - 3.2.3 MUX Setting

NDS3208 8 in 1 MPEG-2 Encoder User’s Manual
14 / 29
3.2.3 MUX Setting
Under this menu, user can choose programs to mux out.
“Channel 1-8” represent the CVBS input. “ASI Channel” represents the ASI input. User could
parse and select program(s) to mux out. The setting principle is the same for channel 1-8 and
ASI Channel. Here take Channel 1 as example:
2.7 ASI output [1] MPTS
2.8 TSID and ONID
3.1 Channel 1
3.2 Channel 2
3.7 Channel 7
3.8 Channel 8
3.9 ASI Channel
3.10 PID remap
Users can copy a
stream from the IP
out streams (1
MPTS & 8 SPTS) to
output through ASI.
Users can choose to
remap PID or not
3.1 Channel 1
[01]CCTV 1
CCTV1
►√ ×
×
Choose” √ ”to output
the corresponding
program. Choose” × ”
to not output.
Press Enter key to
get the program list
Press Enter key to
choose to output the
program or not