Dexin NDS3208 - ASI Output; Save and Load Configuration

NDS3208 8 in 1 MPEG-2 Encoder User’s Manual
23 / 29
Figure-7
ASI Output:
Clicking “ASI Output” from the menu, it will display the interface as Figure-6 where to choose
TS to output from ASI.
Figure-8
System→Save load
Clicking “Save Load” from the menu, it will display the screen as Figure-9.
.
Users can copy a stream from the
IP out streams (1 MPTS & 8
SPTS) to output through ASI.