Need help?Do you have a question about the Dexin NDS3208 and is the answer not in the manual?
General| Brand | Dexin |
|---|---|
| Model | NDS3208 |
| Category | Media Converter |
| Language | English |
Provides an overview of the NDS3208 8 in 1 MPEG-2 Encoder's capabilities and applications.
Lists the key features and technical capabilities of the NDS3208 MPEG-2 Encoder.
Displays the operational principle diagram of the NDS3208 encoder.
Details the components and indicators on the front panel of the NDS3208 encoder.
Illustrates the ports and connectors located on the rear panel of the device.
Lists essential items to verify upon receiving the NDS3208 encoder package.
Outlines the necessary steps and considerations for preparing the device installation.
Presents a visual flowchart detailing the device installation process.
Specifies the required environmental conditions for proper device installation.
Illustrates the connection procedure for analog CVBS video and audio inputs.
Details the connection process for the ASI output interface.
Guides on connecting the network cable for IP output functionality.
Explains how to connect the network cable for Network Management System access.
Explains the function and operation of each button on the device's front panel.
Describes the initialization sequence that occurs after powering on the device.
Guides users on accessing the main menu for general device configuration.
Details how to configure system parameters for each individual encoding channel.
Allows users to enable or disable program output for specific encoding channels.
Explains how to adjust video parameters like brightness, contrast, saturation, and hue.
Enables modification of video, audio bit rates, and program information.
Guides on setting the IP parameters for Serial Program Transport Stream (SPTS) output.
Explains how to configure the IP parameters for the Multiplexed Program Transport Stream (MPTS) output.
Allows users to select and configure programs for multiplexing into a single stream.
Guides on configuring network parameters such as IP address and subnet mask.
Explains the procedure for saving the device's current configuration settings.
Allows users to view the device's software and hardware version information.
Enables users to select the display language for the device interface.
Details how to access and log into the Network Management System (NMS) interface.
Guides on configuring encoder parameters via the web interface.
Details how to configure multiplexing settings through the web interface.
Provides measures to prevent potential issues and hazards during device operation.
Lists specific situations where unplugging the device's power cord is necessary.
To Next Page