NDS3208 8 in 1 MPEG-2 Encoder User’s Manual
11 / 29
parameters in the following editing interfaces, the LCD will display the following pages:
The option with “►” is the current selection, users can press the ENTER key to enter the
specified submenu to modify the device parameter.
3.2.1 System Setting
Under this menu, the LCD will display 8 submenus which from Encoding Channel 1 to
Encoding Channel 8. The setting principle is the same for Encoding Channel 1-8, so here this
manual just takes one channel as the example to explain. After pressing the enter key, the LCD
will display the following pages:
After users enter the submenu, the interface will turn into the following pages, and then users
can enter the corresponding interface to modify the parameters.
To Next Page
Loading...