DFI CA61 - Jumper Settings for Clearing CMOS Data

2
Hardware Installation
17
2.6 Jumper Settings for Clearing CMOS Data
Clear CMOS Data - Jumper JP3
If, for some reason, the CMOS data
becomes corrupted or you forgot the
supervisor/user/keyboard password, the
system can be reconfigured with the
default values stored in the ROM BIOS.
To load the default values, power off your
system and unplug the power cord. Set
JP3 pins 2 and 3 to On. Wait for a few
seconds and set JP3 back to its default
setting, pins 1 and 2 On. You may now
plug the power cord and power-on your
system.
2-3 On:
Clear CMOS Data
1-2 On: Normal
(default)
1
2
3
1
2
3