Specications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its
use. Publication thereof does neither convey nor imply any license under patent- or other industrial or intellectual property rights.
Support
SX2 Mixing Console Bundle Information
© 2019 DHD audio GmbH - Version 1.0.0 - HE, 21.03.2019
Page 37
52-1830 Pin Assignment
USB Audio
The USB audio port at the front panel is a fully functional digital stereo input and output. Connected to a PC or
Mac, each USB audio port is recognised as an USB audio device, which can be used for playback and recording in
every audio software.
The following applies to the front USB audio port:
• 1 stereo input, sample rate converter
• 1 stereo output, sample rate converter (linked to associated input if activated in Toolbox)
• full-speed transceivers
• compliant with USB 2.0 specication
• self-powered USB circuit
• default Windows or Mac USB audio device driver is used, no additional driver required
• iOS devices with version 7.0 or higher can be connected via a camera connection kit for playback and recording
Important
This USB audio port can not be used for maintenance or control purposes.
USB audio port
To Next Page
Loading...