Why are the measured values too high or too low on my Diagnostic Blood Pressure Monitor?
If the Diagnostic Blood Pressure Monitor displays values that seem too high or too low, ensure the cuff is correctly wrapped. If clothing restricts blood flow, remove it and retake the measurement. Relax, rest your elbow on a table with your palm facing up, and ensure the cuff is at heart level before taking another measurement.
What to do if pumping is too slow or the cuff is not inflated on Diagnostic Blood Pressure Monitor?
If the Diagnostic Blood Pressure Monitor's pumping is too slow, or the cuff isn't inflating, reconnect the air tube plug with the device. If there's leakage from the cuff or air tubing, replace it with a new one. Also, make sure the cuff is properly wrapped, as a loose cuff can cause this issue.
How to fix a Diagnostic Blood Pressure Monitor that doesn't display anything after replacing batteries?
If after replacing the batteries and turning on your Diagnostic Blood Pressure Monitor nothing displays, check the battery polarity. If the device still doesn’t turn on, try reinstalling or replacing the batteries.
General| Brand | Diagnostic |
|---|---|
| Model | S-500 |
| Category | Blood Pressure Monitor |
| Language | English |
Key safety warnings about using the blood pressure monitor and potential risks.
Instructions for installing and replacing the AA batteries for the device.
Detailed steps for correctly inserting and changing the device's batteries.
Key factors to consider before and during measurement for accurate results.
Explanation of blood pressure, vital parameters, and systolic/diastolic values.
Details of the warranty coverage, duration, and conditions for the blood pressure monitor.
To Next Page