www.diamatic.eu 10/11 info@diamatic.eu
The choice of professionals
6. Maintenance
Work only with original Diamatic parts.
Dust in the electrical box can damage the frequency inverter; due to this the
electrical box has to be cleaned every day from inside and outside. Clean the
fans and filters from the box with compressed air and a vacuum cleaner.
Check regularly to see if the diamond wings are in good condition. Replace
immediately when these are damaged or worn out.
Check weekly if the diamond plates doesn’t have too much space in the
buffers. If the diamond plate has too much space, replace the buffers.
Prevent premature wear by keeping the machine as dust free as possible, for
these reasons clean the machine regularly with a vacuum cleaner.
Clean the machine every day with air and non-aggressive materials.
Never use water to clean the machine.
Store the cleaned and dry machine in a dry and humid free room. Protect the
electrical motor from moisture, heat, dust and shocks
All repair work must to be done by qualified Diamatic personnel, this to
guarantee a safe and reliable machine.
Any guarantee on the machine is automatically void when:
Non original Diamatic parts and or diamond discs have been used
Repair work is not done by qualified Diamatic personnel
Changes, add items, or conversions are undertaken without the written
permission from Diamatic.
To Next Page
Loading...