Need help?Do you have a question about the Diamond 051D/6M-PS and is the answer not in the manual?
General| Brand | Diamond |
|---|---|
| Model | 051D/6M-PS |
| Category | Dishwasher |
| Language | English |
Check packaging condition and appliance integrity. Report any damage immediately.
Ensure proper placement considering steam, power, water, drain connections and floor stability.
Connect to a suitable power supply with a circuit breaker and grounding system.
Connect to water supply with a shut-off valve, ensuring compatibility of pressure and temperature.
Connect the drain line to a suitable sump without kinks, ensuring it's lower than the machine base.
Dispensed by integral dispenser; installer calibrates dose. Use dishwasher-proof products.
Covers general usage, installation, operation, and maintenance safety precautions to prevent hazards.
Specifies ambient temperature, altitude, and relative humidity ranges for optimal operation.
Identifies and explains the functions of buttons and LEDs on the control panel.
Step-by-step guide to powering on the machine and initial checks before starting.
Provides guidelines for correct rack loading to ensure optimal washing results.
Details on choosing the right cycle and initiating the washing process.
Specific instructions for selecting and starting cycles on under-counter models.
Specific instructions for selecting and starting cycles on hood type dishwashers.
Procedure for safely removing and cleaning the integral filter unit.
Steps for draining water from the tub before cleaning or maintenance.
Procedure for emptying the dishwasher when it is not equipped with a drain pump.
Procedure for draining the dishwasher using the dedicated drain cycle.
Instructions on how to properly switch off the appliance.
Details on running a regeneration cycle for the internal water softener.
Key safety precautions and general guidelines before performing any maintenance tasks.
Recommendations for regular cleaning to maintain the machine in good working order.
Step-by-step instructions for removing and cleaning the filter unit.
Procedure for removing and cleaning the wash and rinse arms to prevent blockages.
Explains LED indicators for malfunctions and provides troubleshooting steps.
To Next Page
