Need help?Do you have a question about the Diamond DC502/6M-PS and is the answer not in the manual?
General| Brand | Diamond |
|---|---|
| Model | DC502/6M-PS |
| Category | Dishwasher |
| Language | English |
Check packaging condition, report damage, and ensure appliance is in good condition before operation.
Ensure installation area is suitable, protect from steam, and set up power/water/drain connections.
Connect to a suitable power supply with an omnipolar circuit breaker and grounding system.
Connect to water supply with a shut-off valve, ensuring compatibility with machine ratings.
Connect drain line to a suitable sump without stretching or blocking, ensuring gravity flow.
Dispensed by integral dispenser; dose set by installer based on water hardness.
Covers improper use, unauthorized service, disconnecting power/water, using with guards removed, overloading, etc.
Specifies ambient temperature, altitude, and relative humidity limits for operation.
Identifies control panel buttons (ON/OFF, DRAIN, PROGRAMME, START) and LEDs (POWER, CYCLE, HEATING).
Steps to turn on the machine, including checking water supply and observing indicator lights.
Guidelines for proper loading of dishes, cutlery, and ensuring correct placement for washing.
Instructions for selecting wash cycles for under-counter and hood models and starting the program.
Instructions for removing and cleaning the integral filter.
Procedures for emptying for machines with and without a drain pump, including filter removal.
How to switch off the machine, noting the POWER LED remains lit.
Process for running a regeneration cycle for the internal water softener.
Daily shutdown procedures including draining, disconnecting power, and closing water supply.
Pre-maintenance steps: drain water, shut off power/water, avoid high-pressure water.
Recommends regular maintenance and periodic sanitising treatments for optimal performance.
Procedure for cleaning baskets, tub, and filters at the end of the day or when filters are dirty.
Instructions for removing and cleaning wash/rinse arms to prevent blockages.
Indicates safety thermostats or level switch triggered; suggests checking drain and power cycling.
Signifies incorrect water filling; check supply, overflow, and power cycle.
Boiler temperature did not reset correctly; switch off/on and run a new cycle.
Machine cannot read temperature; check probe and power cycle.
Procedure to adjust detergent and rinse aid dosing times by holding buttons and pressing START/DRAIN.
Instructions for proper disposal of the appliance according to EU regulations and promoting recycling.
Tips for improving environmental footprint, like washing full baskets and using appropriate programmes.
To Next Page
