EasyManua.ls Logo

Diamond DC502/6 User Manual

Diamond DC502/6
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Mod: DC502/6
Production code: 917333
06/2017
Question and Answer IconNeed help?

Do you have a question about the Diamond DC502/6 and is the answer not in the manual?

Diamond DC502/6 Specifications

General IconGeneral
TypeFreestanding
Place settings12
Programs6
Delay startYes
Child lockYes
Dimensions (H x W x D)85 x 60 x 60 cm

Summary

Chap 1 PREFACE

Chap 2 INSTALLATION

2.1 Unpacking

Check packaging for damage, report any issues to the seller, and handle packaging safely.

2.2 Positioning

Ensure the installation area is suitable, connections are made, floor supports the weight, and the unit is level.

2.3 Electrical connection

Connect to power supply via a circuit breaker, match voltage/frequency, and ensure proper grounding.

2.4 Water circuit hookup

Connect to water supply with a shut-off valve, ensuring compatibility with machine ratings.

2.5 Connection to the drain line

Ensure drain line meets flow capacity, hose reaches sump without restriction, and sump is lower than machine base.

2.6 Rinse aid and detergent

Properly dispense and calibrate rinse aid and detergent using the integral dispenser.

Chap 3 RISKS AND IMPORTANT WARNINGS

General Safety and Operational Warnings

Covers appliance usage, servicing, safety precautions, operating conditions, and potential hazards.

3.1 Normal operating conditions

Specifies acceptable ambient temperature, altitude, and relative humidity for operation.

Chap 4 USING THE MACHINE

4.1 Key and symbols

Identifies and explains the buttons and LED indicators on the control panel.

4.2 Switching the dishwasher on

Step-by-step guide on powering on the appliance, including initial filling and heating.

4.3 Filling the rack

Instructions for properly loading dishes, cutlery, and glassware for optimal washing results.

4.4 Cycle selection and start-up

Details on choosing and initiating wash cycles for different types of loads.

4.4.1 Under-counter dishwashers

Specific procedures for selecting and starting cycles on under-counter models.

4.4.2 Hood dishwashers

Specific procedures for selecting and starting cycles on hood models.

4.5 Removing the integral filter

Guide on how to safely remove and clean the machine's integral filter unit.

4.6 Emptying the dishwasher

Methods for draining the dishwasher, including models with and without drain pumps.

4.7 Turning the dishwasher off

Procedure for safely switching off the dishwasher after use.

4.8 Resin regeneration (*optional)

Instructions for performing water softener regeneration cycles for optimal performance.

4.9 End of shift

Daily procedures for shutting down the machine at the end of the working day.

Chap 5 MAINTENANCE

5.1 General rules

Essential safety precautions and rules before performing any maintenance tasks.

5.2 Cleaning

General recommendations for regular cleaning to maintain machine efficiency and hygiene.

5.3 Cleaning the filter unit

Detailed steps for cleaning the filter unit, including baskets and filters.

5.4 Cleaning the arms

Instructions for removing and cleaning the wash and rinse arms to prevent blockages.

Chap 6 SELF DIAGNOSTICS

Malfunction Indicators and Troubleshooting

Explains LED indicators for self-diagnosis and provides troubleshooting steps for common faults.

Chap 7 DOSING UNIT SETTINGS

Chap 8 SCRAPPING

Chap 9 ENVIRONMENT

Related product manuals