Product MaintainingProduct Maintaining
Cleaning sensors and wheelsCleaning sensors and wheels
Clean the sensors and wheels with soft dry cloth like in pitcure below:
Cleaning charging polesCleaning charging poles
Clean the home base and charging poles with soft dry cloth like in pitcure below:
Product MaintainingProduct Maintaining
Cleaning rolling brush and assy
Remove the rolling brush and assy from the main body, and clean them with soft dry cloth or cleaning
tools. ( the rolling brush can be washed by water)
Note: Install the rolling brush and assy one by one after they are dry.
Cleaning suction passage and dust sensor Cleaning suction passage and dust sensor Cleaning suction passage and dust sensor
Take off suction passage assy from robot, and cleaning it via brush or mop as picture.
Note: sensor can not touch water or liquid directly
To Next Page
Loading...
