Need help?Do you have a question about the DIEBOLD NIXDORF BEETLE /iPOS plus SL and is the answer not in the manual?
Equipment complies with FCC Class B limits for digital devices, ensuring protection against harmful interference in commercial environments.
The BEETLE /iPOS plus SL meets ENERGY STAR version 6.0 criteria for Integrated Desktop computers.
Declares the device's compliance with essential requirements of EU Directive 2014/53/EC.
Warning regarding installation and antenna separation (20cm) to comply with RF exposure limits.
Critical safety guidelines for operation, handling power, and environmental considerations.
Cautionary note on the risk of explosion from incorrect battery replacement and proper disposal.
Instructions for cleaning the system housing using appropriate cloths and cleaning agents.
Outlines conditions under which damages are not covered by the product warranty.
Steps to unpack the system and verify the delivery contents against the delivery note.
Lists the typical configuration components of the BEETLE /iPOS plus SL, including processor, RAM, and storage.
Guidance on setting up an ergonomic workspace to minimize glare and optimize viewing comfort.
Recommends optimal screen positioning for comfortable viewing from above.
Identifies and labels the main components visible on the front of the BEETLE /iPOS plus SL with its desktop stand.
Identifies and labels the main components on the back of the BEETLE /iPOS plus SL with its desktop stand.
Details the functions of front panel controls like buttons and indicators like LEDs.
Outlines the benefits and characteristics of the projected-capacitive touch screen technology.
Provides specific instructions and recommendations for cleaning the touch screen surface safely.
Presents detailed dimensional drawings for desktop and wall mount configurations of the system.
Specifies essential requirements for choosing a suitable installation location for optimal performance and safety.
Steps to prepare the display unit before attaching it to the stand, including screw and cover management.
Detailed instructions for physically mounting the display onto the assembled desktop stand.
Step-by-step guide for installing the optional I/O Hub accessory onto the stand.
Instructions on how to properly connect various external cables to the system's ports.
Procedures for safely and correctly disconnecting all types of cables from the device.
Comprehensive guide on how to replace the internal Solid State Disk (SSD).
Instructions for replacing the Random Access Memory (RAM) modules within the system.
Lists the necessary components and tools for performing a wall mount installation.
Provides guidelines for optimal mounting height based on user accessibility and ergonomic standards.
Step-by-step guide for securely mounting the back plate of the wall mount system to the wall.
Introduction to the Waiter Lock peripheral for system access control.
Instructions for installing the Waiter Lock module onto the system.
Details the Magnetic Swipe Card Reader peripheral and its operation.
Instructions for installing the Magnetic Swipe Card Reader module onto the system.
Introduction to the Barcode Reader peripheral and its capabilities.
Instructions for installing the Barcode Reader module onto the system.
Explains the sequence of operations when the system is first powered on, including self-tests and boot order.
Describes how to diagnose system errors using LED blinking patterns and an error code table.
Explains the generation of Power-On Self-Test (POST) codes via LED blinks during boot errors.
Comprehensive technical specifications for the BEETLE /iPOS plus SL, including dimensions and display characteristics.
Technical details and standards supported by the NFC module.
Description of the I/O Hub accessory and its port configurations.
Lists approved printers compatible with the system and warnings for non-approved devices.
General| Brand | DIEBOLD NIXDORF |
|---|---|
| Model | BEETLE /iPOS plus SL |
| Category | Touch terminals |
| Language | English |
To Next Page
