Button Functions
Lap (top, side button) (2) functions
A. Displays time.
B. Press and hold to show best time segment.
Engine
(bottom, side button) (2) functions
A. Cycles between up to three sets of data.
B. Press and hold to show maximums and designators.
Power / Exit
(2) functions
A. Turns the instrument on and off.
B. Exits Set Up and Playback modes.
← / Light
(2) functions
A. Press and hold to dim warning lights, and turn backlight on and off.
B. Decreases values in Set Up and Playback.
→ / Set Up
(2) functions
A. Enter Set Up.
B. Increases values in Set Up and Playback.
Play / Pause
(2) functions
A. Press for time, maximums and playback.
B. Pauses and resumes playback.
Reset Instrument
Erases recorded data and for troubleshooting.
A. Press Play / Pause and → at the same time.
B. Then Press Play / Pause within 10 seconds.
To Next Page
Loading...