Designator Definitions
The following is a list of designators that can appear in the main part of your display:
select this to set your engine limits
select this to set your warning lights
displayed if the Play button is pressed and there is no recorded data
displayed if a warning light is set to not come on
displayed when setting the Tach or JS calibration number
displayed if your batteries are low
during a reset of memory, press the Play button to proceed with reset
displayed if a reset of memory was successful
displayed if a reset of memory is not successful
last lap time
current lap time
best lap time
lap distance
total hours
odometer
displayed when recording and the Play button is pressed
displayed if the engine is on when trying to enter Playback
displayed when the instrument is communicating with your PC
, Channel 1, Channel 2, which is temp1 and temp2 respectively
when shown on the top of a display, the function is over ranging. when shown on the bottom of a display, the function is
under ranging
The following is a list of enunciators that can appear on the side of your displays. These show what function is in the display:
RPM1 tach RPM2 jackshaft RPM
CHT cylinder head temperature EGT exhaust gas temp.
MEM memory ERR error
Repairs and Warranty Information
If you have any questions about the operation of your instrument, please call. One of our technicians will be happy to help you. Please
have your instrument nearby to help while troubleshooting with the technician.
With the exception of physical damage and normal wear, there will be no charge for service required on internal parts for two years
from date of purchase and for external parts for one year. Be sure to fill out and return your warranty card for our records. If we do
not have a card on file for your instrument, you will be charged for repairs unless you can provide us with a proof of purchase date.
When returning an instrument for repair, please use the repair form found on our website or enclose a note indicating your return
address, phone number and a detailed description of the problem. Send your instrument and sensors so that we can check the
complete system.
Send repairs to:
Digatron LLC
120 N. Wall St. Ste 300
Spokane, WA 99201
www.digatronusa.com
Phone: (509) 467-3128 Fax: (509) 467-2952 5/7/2008
To Previous Page
Loading...