30
Precaution for Refueling
Smoking and open fire are prohibited during refueling and
near the refueling point. Do not disassemble the fuel tank
cap or refuel while the engine is running or is not cooled
down. Do not splash fuel to any high temperature surface of
machine.
Refuel the fuel tank in a well-ventilated place. Do not top up
the fuel tank. Leave an expansion space for the fuel.
Any overflown fuel shall be wiped away immediately.
Tighten the fuel tank cap securely. If the fuel tank cap is
missing, replace with original cap only. The use of non-
authorized fuel tank cap with poor ventilation will cause internal pressure in the fuel tank.
Do not use fuel for any cleaning purpose.
Use correct fuel grade based on the season.
Handling of Hoses
The leakage of lubricating oil or fuel can result in fires.
Do not distort, bend, or impact any hose.
Do not use any distorted, bent, or cracked pipeline, metal pipe, or hose, otherwise it may result
in explosion.
Re-tighten any loose connector.
Caution during handling of High Temperature and High Pressure Parts
Please stop the engine and wait for the machine to cool down before maintenance.
The engine, exhaust pipe, radiator, hydraulic pipes, sliding parts, and many other machine parts
are really hot when the engine is just stopped. Touching such parts can cause scalding.
The engine coolant, hydraulic oil, and other fluids are also under high temperature and high-
pressure status.
Take caution not to touch the hydraulic oil while loosening engine hood or connector. Operating
the machine under such condition will cause out-spray of hot oil to result in scalding or injuries.
Do not disassemble the radiator cap or drainage plug when
the coolant is hot. Stop the engine and wait for the engine
and coolant to cool down. Slowly loosen the radiator cap to
relieve the internal pressure and then take it out.
Caution against Internal Oil Pressure
Take caution against internal oil pressure. After stopping, the
pressure in the hydraulic oil pipes can hold for a long time.
Before the maintenances, thoroughly relieve the internal
pressure.
To Next Page
Loading...
Need help?
General