31
The high pressure of hydraulic oil can
penetrate skin and eyes which amy cause
serious injuries and blindness or even death.
Please bear in mind that the hydraulic oil
permeating from orifices is nearly invisible to
naked eyes. While checking for leakage, wear
goggles and thick gloves and protect the skin
by paper boards or plywood to protect
against the harm of spraying hydraulic oil.
If hydraulic oil penetrating into your skin
please consult your doctor or emergency department.
Pressure Relief before Operations of Hydraulic System
Disassembling cap or filter or disconnecting pipeline before the pressure relief of hydraulic
system may result in out-spray of hydraulic oil.
• Slowly loosen the bleeding plug to relieve the pressure of oil tank.
• While disassembling connector or plug or disconnecting hose, stand on one side, loosen
slowly to gradually relieve internal pressure, and then take out.
• The engine oil or oil plug may spray out under the internal pressure of traveling motor oil
tank. Please slowly loosen the oil plug to relieve the internal pressure.
Guard against Splashed Fragments during Use of Hammer
During the use of hammer, the pins and the metal fragments may fly out. It may cause serious
personal harm.
• While hammering hard metal parts such as pins, bucket teeth, side teeth, and bearings,
please wear protective articles including goggles and gloves.
• While hammering pins and bucket teeth, ensure there is no person in surrounding area.
Guard against High Pressure Grease
In the track tensioner, the grease is injected under high pressure. If the tension is not adjusted by
the following designated procedure, the grease relief valve may fly out to cause injuries.
• Never loosen the grease pipe fittings.
• Slowly loosen the grease relief valve. Do not rotate it for >1 turn.
• Do not place your face, arms, legs, or body in front of the grease relief valve.
• If no grease flows out when the grease relief valve is loosened, the valve is malfunctioned.
Please contact your service dealer for repairs.