51
After the stop of engine, depress the auxiliary hydraulic pedal from one side to other side for
several times.
Before Start of Operations Getting on/off Machine
Warning
Do not jump on or off the machine. Do not attempt to get on or off a moving machine.
Before getting on or off the cab, firstly open the door completely to locking position and check
and ensure that the door can’t move further.
While getting on/off the footplates, hold the handrails to
support your body weight and maintain three-point
balance posture (Hands and feet) for your body.
Do not use safety lock handle or any joystick as handrail.
Walk-Around Check
Before the first start of engine each day, fulfill one walk-
around check.
Start and Stop of Engine Before Start of Engine
Adjust the seat to comfortable operating position.
Fasten the seat belt.
Check and ensure that the safety lock handle is at locking
position.
Check and ensure that all joysticks and pedals are in
neutral position.
Insert the key into starter switch, rotate to ON position,
and then check as below:
All warning lamps turn on for 1s and the warning tone is
issued for 2s. The instruments start working. After 2s,
the engine oil pressure warning lamp (1) turns on and the
other lamps turn off.
Press the lamp switch and check and ensure that the
boom lamp, headlamp, and instrument lamp turn on.
If a lamp fails to turn on or a warning lamp fails to sound,
the lamp bulb or wire is probably damaged. Please contact your service dealer for repairs.
To Next Page
Loading...