57
In-situ Turnaround
Left turn under stopped status: To turn left the head:
Push forward the right joystick. To turn left the tail:
Push backward the right joystick.
To turn backward, operate the right joystick by same operation method of left joystick.
In-situ left turn:
Pull backward left joystick and push forward right joystick.
In-situ right turn:
Pull backward left joystick and push forward left joystick.
Stop of Traveling
Stop the machine on a level, solid, and safe ground. Set the parking device. If it's necessary to
park the machine on a slope, block the track by wedges to prevent movement of machine.
When the safety lock handle is unlocked, accidental touch of any joystick will result in sudden
movement of machine and may cause serious injuries.
Please note that, even if the safety lock handle is placed at locking position, the bulldozing blade,
boom, and auxiliary hydraulic controls can’t be locked.
Do not touch such controls accidentally
Slowly place the left and right traveling joysticks to neutral position. Stop the machine.
Operations of Working Device
Before starting operations, please carefully check and confirm the joystick mode to be used.
Do not stop the machine hastily, unless in event of emergency. Stop the machine at the optimal
timing whenever possible.
Use the right joystick to operate the boom and bucket.
Use the left joystick to operate the bucket arm and slewing.
Return the joysticks to neutral position to stop the bucket working device.
Lower down the safety lock handle to the unlocking position.
Set the pedal cover to unlocking position.
To Next Page
Loading...
Need help?
General